电感耦合等离子体原子发射光谱法(ICP-AES)测定铜渣精矿中杂质含量

采用电感耦合等离子体发射光谱法测定了铜渣精矿中砷、锑、铋、铅、锌、镁的量。其测定范围:ω(As):0.05%~0.45%,ω(Sb):0.07%~0.30%,ω(Bi):0.01%~0.20%,ω(Pb):1.00%~4.50%,ω(Zn):1.00%~4.50%,ω(Mg):0.10%~1.00%。经加标回收实验,各元素的加标回收率为92%~104%(n=3),相对标准偏差(RSD)小于5%(n=11)。方法准确快速可靠,适用于铜渣精矿中砷、锑、铋、铅、锌、镁量的同时测定.     

微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

电感耦合等离子体发射光谱法测定粗二氧化碲中 铜、铅、锑、铋、砷和硒

粗二氧化碲作为碲精炼或碲化工产品生产的重要原料,其中共存元素铜、铅、砷、锑、铋、硒含量的准确测定对于生产过程质量控制和贸易结算具有重要意义,但目前没有粗二氧化碲中铜、铅、砷、锑、铋、硒含量检测的标准分析方法。采用王水和饱和氟化氢铵分解试样,在王水和酒石酸介质中,选用Cu 327.393 nm、Pb 220.353 nm、Sb 217.582 nm、Bi 223.061 nm、As 193.696 nm、Se 196.026 nm为分析谱线,采用电感耦合等离子体发射光谱(ICP-AES)法测定粗二氧化碲中铜、铅、锑、铋、砷和硒含量。各元素校准曲线的相关系数均大于0.999;铜、铅、锑、铋、砷和硒的检出限分别为0.0004%、0.0005%、0.0006%、0.0007%、0.0004%和0.0007%,定量检出限分别为0.0012%、0.0016%、0.0020%、0.0025%、0.0013%和0.0025%。按照实验方法测定5个粗二氧化碲样品中铜、铅、锑、铋、砷和硒,测定结果的相对标准偏差(RSD,n=7)为0.79%~4.8%,加标回收率为96.0%~103%。方法简单,精密度和准确度较高,可用于测定粗二氧化碲中铜、铅、砷、锑、铋、硒含量。     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Constructing novel red-emitting Ba2Y0.8Eu0.2NbO6:Mn4+ phosphors for multi-type luminescent thermometers and high-security anti-counterfeiting films

To date, luminescent materials have been preferably used for non-contact optical thermometers. In this manner, novel red-emitting Ba₂Y_0.8Eu_0.2NbO₆:Mn⁴⁺ (BYEN:Mn⁴⁺) phosphors were designed for multi-type non-contact luminescent thermometers based on the dual-emission states and temperature-dependent lifetime (TDL) models. In the temperature range of 303–483 K, the sensing sensitivities based on the dual-emission states of (⁵D₀→⁷F₂, ²E_g→⁴A_2g) and (⁵D₀→⁷F₁, ²E_g→⁴A_2g) were estimated. Especially, the maximum absolute sensing sensitivity (S_a) was found to be about 0.1558 K^-1 for the BYEN:0.007Mn⁴⁺ phosphor based on the ⁵D₀→⁷F₁ and ²E_g→⁴A_2g positions. This phosphor also exhibited good relative sensing sensitivity (S_r) (0.0186 K^-1) based on the ⁵D₀→⁷F₂ and ²E_g→⁴A_2g states. Besides, the relative sensing sensitivities (S_R) at ⁵D₀→⁷F₁ and ²E_g→⁴A_2g transitions were estimated to be 0.0034 and 0.0194 K^-1, respectively with the help of the TDL technique. In the light of these results, novel red-emitting Ba₂Y_0.8Eu_0.2NbO₆:Mn⁴⁺ phosphors are expected to be a potentially attractive candidate for applications in multi-type luminescent thermometers. Finally, a novel unique polydimethylsiloxane film exhibiting tricolor-luminescent emissions was introduced and further suggested for high-security anti-counterfeiting.     

Superb thermal stability purple-blue phosphor through synergistic effect of emission compensation and nonradiative transition restriction of Eu2+

Phosphors with outstanding luminescence thermal stability are desirable for high-power phosphor-converted light-emitting diode (pc-LED) lightings. High structural rigidity and large bandgap of phosphor hosts are helpful to suppress nonradiative relaxation of optical centers and realize excellent thermal stability. Unfortunately, few host materials simultaneously possess aforementioned structural features. Herein, we confirm that Sr₃(PO₄)₂ (SPO) phosphate possesses high structural rigidity (Debye temperature, Θ_D = 559 K) and large bandgap (E_g = 8.313 eV) by density functional theory calculations. As expected, Eu²⁺-doped SPO purple-blue phosphors show extraordinary thermal stability. At 150/300 °C, SPO:5%Eu²⁺ presents emission loss of only 4%/8% and a predicated ultrahigh thermal quenching temperature of 973 °C. The most strikingly discoveries here are that thermal-induced emission compensation appears within two distinct Eu²⁺ sites of SPO host. The outstanding thermal stability, on one hand, is attributed to rigid structure and large bandgap of host that inhibits nonradiative relaxation of Eu²⁺ and on the other hand, the emission self-compensation of Eu²⁺. Benefiting from synergistic effect of emission compensation and nonradiative transition restriction of Eu²⁺, as-prepared SPO:5%Eu²⁺ purple-blue phosphor not only presents superior thermal stability but also high internal quantum efficiency of 95.1% and excellent hydrolysis resistant. Some advanced applications are explored including white LED lighting and wide-color-gamut display. Our work provides in-deep insights into structure-property relationships of thermally stable phosphors.     

Quinoline-based aggregation-induced delayed fluorescence materials for highly efficient non-doped organic light-emitting diodes

Three new emitters,namely 10,10'-(quinoline-2,8-diyl)bis(10 H-phenoxazine)(Fene),10,10'-(quinoline-2,8-diyl)bis(10 H-phenothiazine)(Fens) and 10,10'-(quinoline-2,8-diyl)bis(9,9-dimethyl-9,10-dihydroacridine)(Yad),featuring quinoline as a new electron acceptor have been designed and conveniently synthesized.These emitters possessed small singlet-triplet splitting energy(ΔEst) and twisted structures,which not only endowed them show thermally activated delayed fluorescence(TADF)properties but also afforded a remarkable aggregation-induced emission(AIE) feature.Moreover,they also showed aggregation-induced delayed fluorescence(AIDF) property and good photoluminescence(PL) property,which are the ideal emitters for non-doped organic light-emitting diodes(OLEDs).Furthermore,high-performance non-doped OLEDs based on Fene,Fens and Yad were achieved,and excelle nt maximum external quantum efficiencies(EQE_(max)) of 14,9%,13.1% and 17,4%,respectively,were obtained.It was also found that all devices exhibited relatively low turn-on voltages ranging from 3.0 V to3.2 V probably due to their twisted conformation and the AIDF properties.These results demonstrated the quinoline-based emitters could have a promising application in non-doped OLEDs.     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

Selective sensing of CrVI and FeIII ions in aqueous solution by an exceptionally stable TbIII-organic framework with an AIE-active ligand

We herein report a new lanthanide metal-organic framework (MOF) that exhibits excellent chemical stability, especially in the aqueous solution over a wide pH range from 1 to 14. In contrast to many reported lanthanide MOFs, this Tb-based MOF emits cyan fluorescence inherited from the integrated AIE-active ligand, rather than Ln³⁺ ions. More remarkably, its fluorescence signal features a highly selective and sensitive “turn-off” response toward CrO₄²⁻, Cr₂O₇²⁻ and Fe³⁺ ions, highlighted with the low detection limits down to 68.18, 69.85 and 138.8 ppm, respectively. Thus, the exceptional structural stability and sensing performance render this material able to be a superior luminescent sensor for heavy metal ions in wastewater.     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。